Cold ink CHEM-WELD 9310, solution*

Product detailed description

CHEM-WELD 9310 - Cold ink - solution

Preparation for cold blackening of ferrous objects

particularly suitable for blackening small or hollow parts

CHEM-WELD 9310 BLACKING - Solution

WARNING: Sold for professional use only - sales on a registered number. The product is dangerous. Read the MSDS carefully.

For permanent blackening of cast iron and steel, containing not more than 12% nickel and chromium.

Wide range of applications. Suitable for blackening hollow parts such as gun barrels, blackening small parts, screws, machine parts, car parts, decorative objects.

Instructions. At lower temperatures, uneven colouring or low colour saturation occurs. The blackening solution should be at a temperature of 15-20°C. Also allow the parts to be blackened to reach room temperature. The surface of the material must first be free of rust, thoroughly degreased and cleaned. For degreasing we recommend CHEM-WELD 1802 spray, which evaporates without residue. Yield: 1 litre / 4-5^m2.

Pour off the required amount of ink (concentrate). Dilute as required with water in a ratio of 1:3 ( 1 part ink and 3 parts water). The material is immersed in the solution for about 1 minute, so that it is completely submerged. It is advisable to stir or shake the blackening bath with the parts to release any air bubbles attached to the metal parts. After blackening, the items are rinsed in water, dried and treated with oil. The used bath should be disposed of as hazardous waste. Never pour the residue of the blackening bath back to the blackener, it already contains metal ions and would deactivate the entire solution.

Packaging:

pc (250ml) / litre / canister (5 litres) / canister (25 litres)

CHEM-WELD 9310
Cold ink - solution

Hazard. For professional use only.

Contains: Selenium dioxide, nickel sulfate.

H315 Irritating to skin. H317 May cause allergic skin reaction. H318 Causes serious eye damage. H332 Harmful by inhalation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H341 Suspected of genetic damage. H350i May cause cancer by inhalation. H360D May damage the foetus in the mother. H372 Causes organ damage by prolonged or repeated exposure. H411 Toxic to aquatic organisms, with long term effects.

P201 Obtain special instructions before use. P280 Wear protective goggles. P304+P340 IF BREATHING: Move person to fresh air and keep in a position to facilitate breathing. P305+P351+P338 IF EYES ARE COLD: Gently flush with water for several minutes. Remove contact lenses, if fitted and if they can be removed easily. Continue rinsing. P308+P313 IF exposed or suspected: Seek medical attention/treatment. P310 Call a doctor immediately. P391 Collect spillage.

Importer:
CHEM-WELD ROUDNICE s.r.o., Žižkova 710,
Roudnice nad Labem, 41301, Czech Republic,
ID: 47783303, phone: +420 725 062 600
Emergency telephone number: +420 224 91 92 93

UFI: EAST-X0H9-C00Q-81J2