CHEM-WELD 8200 High strength MIG wire for tool steels
Code: 8200085 8200080C15 8200105 8200100C15 8200120C15 Choose variantRelated products
Product detailed description
CHEM-WELD 8200 M
High strength wire for high alloy and unknown steels
Welding wire for welding tool steels, unknown steels, for joining alloy steels to carbon steels, for welding armour steels, manganese, high carbon, high alloy, hardened, spring and difficult to weld steels. As an intermediate layer for pad welding, for welding on low carbon steels. High strength, crack resistant welds.
Ideal for repair of gears, piston rods, dies, rails, heat deformed tools, repair of cutting knife stops.
For materials:
X10 CrAl24;1.4762;446;H24JS;G-X70 Cr29;1.4085;G-X32 CrNi28 10; 1.4339; G-X40 CrNi27 4; 1.4340; G-X8 CrNi26 7; 1.4347; X2 CrTi12; 1.4512; 409; X5 CrNi18 9; 1.4301; 304; 0H18N9; 25CrMo4; 1.7218; 4130; 20HM; 25HM; 42CrMo4; 1.7225; 4145; 40HM; 50CrMo4; 1.7228; 5150; 50H; 42MnV7; 1.5223; 34CrNiMo6; 1.6582; 34HNM; 41CrMo4; 1.7223; 4140; C45; 1.0503; M1044; C45; C60; 1.0601; 1060; C60; C55; 1.0535; 1055; C55;
Standard: AWS A 5.9: ER 312 / EN ISO 14343-B: SS312
Protective gas: M13(Ar+1-3% O2) / M12(Ar+2%CO2 )
|
Typical chemical composition of weld metal [%]: |
C |
Mn |
Cr |
Ni |
Si |
|
0,1 |
1,7 |
30,0 |
9,0 |
0,4 |
|
Mechanical properties of weld metal: |
Rm [MPa] |
Rp [MPa] |
A5 [%] |
kV [J] 20°C |
Hardness |
|
740-850 |
>540 |
>18 |
>30 J |
230 HB |
|
Wire diameter |
Packaging |
Welding current |
|
About 0.8 mm |
5 kg / 15 kg |
100-160 A ( = +) |
|
O 1.0 mm |
5 kg / 15 kg |
140-200 A ( = +) |
|
About 1,2 mm |
5 kg / 15 kg |
170-260 A ( = +) |
Additional parameters
| Category: | MIG/MAG WIRES |
|---|---|
| běžná ocel: | běžná ocel |
| legovaná ocel: | legovaná ocel |
| nerez: | nerez |
| pozink: | pozink |
| Mn ocele: | manganové ocele |
| neznámé ocele: | neznámá ocel |
| pruž.ocele: | pružinová ocel |
| kalitelné oceli: | kalitelné oceli |
| niklové slitiny: | niklové slitiny |
Be the first who will post an article to this item!
Britská společnost MWA je výrobcem přídavným materiálů od roku 1974. Od roku 2017 je součástí koncernu WELDFAST.
Společnost CHEM-WELD je výhradním zástupcem značky MWA pro Českou Republiku a Slovensko.
