TIG / soldering iron for aluminium AlSi12 CHEM-WELD 860
Code: 860200KS 860200 860250KS 860250 860300KS 860300 860400KS 860400 Choose variantRelated products
Product detailed description
CHEM-WELD 860 W
Aluminium brazing / TIG welding wire - very thin flowing
Versatile AlSi12 aluminium solder filled with active flux. For aluminum structures, locksmithing, aluminum casting repair, engine blocks, fans, platforms, window and door frame fabrication, irrigation pipes, bicycle frames, radiators, heat exchangers, radiators, electric motor covers, lighting, ladders, railings, decorative elements. Very thin flowing, has good flowability and good wettability.
Suitable for repair and fabrication of thin aluminium sheets, for Al-Si alloys with more than 7% Si. Not suitable for subsequent anodizing. Can be used for brazing - flux 120 and oxy-acetylene (autogenous) heating required, but also for TIG welding.
For materials: G-AlSi10Mg, , G-AlSi12, 3.2581, G-AlSi10Mg(Cu), 3.2383, G-AlSi12(Cu), 3.2583, AlMg1SiCu, 3.3211, PA45, 6061, AlMg0,5Si, 3.3206, PA38, 6063, AlMgSi1, 3.2315, PA4, 6082, G-AlSi5Mg, 3.2373, 3.3581, 3.3583, 3.2383, 3.2373, 3.2161, 3.2371, 3.2151
Standards: DIN 1732 S-AlSi12 / EN 1044 Al 104 / AWS A 5.8: BAlSi-4 / EN 1044: AL104 /EN 17672: B/SAL88Si
Supplies: length 1 m; O 2.0 / 2.4 / 3.2 mm
|
Typical chemical composition of weld metal [%]: |
Si |
Al |
|||||
|
12 |
88 |
||||||
|
Mechanical properties of the weld metal: |
Rm [N/mm2] |
A5 [%] |
Density [g/cm3] |
Working temperature[°C] |
|||
|
125 |
8 |
2,65 |
575-590 |
||||
Additional parameters
| Category: | SOLDERING / BRAZING |
|---|---|
| hliník: | hliník |
Be the first who will post an article to this item!
List of ratings
Společnost CHEM-WELD byla založena v Rakousku roku 1967 panem Siegfriedem Schweigerem.
Název CHEM-WELD znamená spojení chemie a svařování.
Prvním výrobkem bylo speciální lepidlo na kov Chem-Stahl 1000 HT, které nahrazovalo svařování v dolech JAR.
